Measurement-computing WBK20A Uživatelský manuál stáhnout pdf (Strana 23)

WBK20A, PCMCIA/EPP Interface Card

04-02-02

Port Assignment 4-1

Finding the Port Assignment 4

Using Windows 95/98/Me to Find the Port Assignment

Reference Note:

This section applies to Windows 95, Windows 98, and Windows Me. If you are using

Windows 2000 or Windows XP, refer to the section of this chapter, beginning on page 4-3.

1. From the desktop, navigate to the System Properties window as follows:

Settings

⇒

⇒⇒

⇒Control Panel

⇒

⇒⇒

⇒ System

The System Properties window will appear.

In the Systems Properties window, click on the Device Manager Tab. A device tree will

appear, similar to that seen in the following figure.

3. On the device tree, expand the Ports (COM & LPT) selection. At this point you should see a

WBK20 listed (see figure). Note that the Device Manager recognizes WBK20A as a WBK20,

since the two cards are identical in function.

4. Look at the WBK20 [WBK20A] port designation. In the following example we see that the

WBK20A is assigned to port LPT2.

Make a note of the port designation for use in the WBK20A interface test. The test is

discussed in the following section.

Finding the Port Assignment of the WBK20A

If IOtech WBK20A is not listed in the Windows Device Manager, refer to the

section entitled, “Troubleshooting, Symptom 1,” located in chapter 6.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 37 38

Žádné komentáře

Measurement-computing WBK20A Uživatelský manuál Strana 23