Measurement-computing Digital488/80A Uživatelský manuál Strana 58

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 106
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 57
CAUTION
Because the Configuration (C) command is used, the following programming
example(s) will not work properly if the HVCX1 option is installed with a conflicting
hardware configuration. To be safe, remove the HVCX1 board and replace it with the
jumper board to run the example(s).
EXAMPLE 5: Command Conflict Error.
PRINT#1,"OUTPUT08;G0C5P1X"
Line 1: Configure all 5 ports as outputs; select Port 1 only.
PRINT#1,"OUTPUT08;D123456ZX"
Line 2: Send too much data for one port.
PRINT#1,"OUTPUT08;E?"
Line 3: Query the error status (ERROR LED should be on).
PRINT#1,"ENTER08",
INPUT#2,A$,
PRINT A$
Line 6: Display shows: E3-Conflict Error (ERROR LED should
be off).
52 Digital488/80A Commands
967695 Digital488/80A User's Manual
Zobrazit stránku 57
1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 105 106

Komentáře k této Příručce

Žádné komentáře