Measurement-computing USB-1608HS-2AO Uživatelský manuál stáhnout pdf (Strana 25)

USB-1608HS-2AO User's Guide Specifications

Note 1: The maximum differential non-linearity specification applies to the entire 0-55 °C temperature

range of the USB-1608HS-2AO. This specification also accounts for the maximum errors due to

the software calibration (in Calibrated mode only) and the AD7685 analog to digital converter

non-linearities.

Table 2. Calibrated absolute accuracy

Range

Accuracy (mV)

±10 V

± 7.019

±5 V

± 3.509

±2 V

± 1.403

±1 V

± 0.702

Table 3. Accuracy components - All values are (±)

Range

Integral Non Linearity

(% FSR)

Gain error at FS

(mV)

Offset (mV)

Gain tempco

(ppm/°C)

Offset tempco

(µV/°C)

±10 V

0.00915

4.578

1.526

3.8

19.5

±5 V

0.00915

2.289

0.763

7.0

19.5

±2 V

0.00915

0.916

0.305

16.5

24.3

±1 V

0.00915

0.458

0.153

40.1

29.2

Note 2: When connecting differential inputs to floating input sources, the user must provide a DC return

path from each differential input to ground. This can be accomplished by simply connecting a

resistor from each of the differential inputs to AGND. A value of approximately 100 kΩ can be

used for most applications.

Table 4. Noise performance – all values are (±)

Range

Peak to Peak Noise

(counts)

RMS noise

LSBrms

±10 V

1.21

±5 V

1.21

±2 V

1.21

±1 V

1.21

Table 4 summarizes the noise performance for the USB-1608HS-2AO. Noise distribution is determined by

gathering 50 kS with inputs tied to ground at the user connector. Samples are gathered at the maximum

specified sampling rate of 250 kS/s.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 31 32 33

Komentáře k této Příručce

Žádné komentáře

Measurement-computing USB-1608HS-2AO Uživatelský manuál Strana 25

Komentáře k této Příručce

Související produkty a manuály pro Hardware Measurement-computing USB-1608HS-2AO