Measurement-computing E-PDISO16 Uživatelský manuál stáhnout pdf (Strana 26)

E-PDISO16 User's Guide Specifications

Ethernet and input filter "Factory Default" settings

Table 8. Factory default specifications

Default IP address 10.0.2.251

Default IP mask 255.255.255.252

Default Gateway 10.0.2.1

Default DHCP setting Enabled

Default Filter setting All Filters Off

LED displays and the "Factory Default" button

Table 9. LED and button configurations

POWER LED 6.0 V < V

ext

< 12.5 V On

ext

<6.0 V

ext

> 12.5 V Off (power fault)

TEST LED Blinks when commanded to by software.

LINK LED On when there is a valid Ethernet connection.

ACTIVITY Blinks when an Ethernet packet is sent or received.

Factory default button

Returns the device to its factory default condition including resetting all Ethernet, filter

and relay conditions.

Mechanical

Table 10. Mechanical specifications

17.0" (L) x 4.8" (W) x 0.8" (H) Card dimensions

431.8 mm (L) x 121 mm (W) x 20.3 mm (H)

17.2" (L) x 5.2” (H) x 1.6” (H) Case dimensions

436.9 mm (L) x 132.1 mm (W) x 40.6 mm (H)

Environmental

Table 11. Environmental specifications

Operating temperature range

0 to 70 °C

Storage temperature range -40 to 100 °C

Humidity 0 to 95% non-condensing

Main connector

Table 12. Main connector specifications

Connector type Screw terminal

Wire gauge range 14-30 AWG

5-3

1 2 ... 21 22 23 24 25 26 27 28

Žádné komentáře

Measurement-computing E-PDISO16 Uživatelský manuál Strana 26