Measurement-computing LogBook Series Uživatelský manuál stáhnout pdf (Strana 89)

LogBook User’s Manual 958396 GPS and Serial Device Data Collection 6-1

GPS and Serial Device Data Collection 6

Applies to LogBook/360 Only

Introduction

The LogBook/360 has two serial ports to which RS-232 devices can be attached. Using the LogView interface,

serial data channels can be described that allow the LogBook to collect data from the devices, convert them to

channel values, and store them synchronously with its analog and digital inputs.

Although the auxiliary serial ports are standard in the LogBook/360, the serial input software is sold separately as

option LogBook/GPS.

Use the following authorization code to enable the feature:

ED7B55484273

LogBook/300 does not support serial device input.

LogBook/360 Connected to GPS Receiver and a Serial Device

Virtually any serial device that sources continuous ASCII data, including Global Positioning System (GPS) devices,

gas flow meters, and scales, is compatible. GPS devices conforming to the NMEA 0183 standard are supported

directly in the LogView interface, so no knowledge of the data format is necessary. The GPS receiver must be

purchased separately and is available from a variety of sources. For ease of operation, make sure the receiver

complies with the NMEA 0183 protocol standard.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 221 222

Žádné komentáře

Measurement-computing LogBook Series Uživatelský manuál Strana 89