Measurement-computing IOtech 640 Series Uživatelský manuál stáhnout pdf (Strana 91)

Appendix B 907493 TCP/IP and Resource Tests for 640 & 650 Series B-1

Appendix B – TCP/IP and Resource Tests B

Before you run a test

Before testing the system, make sure the device has been properly installed and powered-on. Make sure all

cables are properly and securely connected.

When testing a 640 or 650 Series device, if the unit does not respond within 30 seconds

perform the following steps:

1) reboot the system

2) upon power-up, re-open the Daq* Configuration applet

3) select another configuration setting

4) reinitiate the test

How to run the TCP/IP Test (The TCP/IP test is for Ethernet devices only)

The TCP/IP (Transmission Control Protocol/Internet Protocol) test is for Ethernet devices only. The test is

accessed and initiated as follows.

a. Open the Control Panel by navigating from the Windows’ Desktop as follows:

Start Menu ⇒ Settings ⇒ Control Panel

b. From the Control Panel, double-click the Daq Configuration icon.

c. Double-click on the 640e or 650e from the Device Inventory configuration tree.

d. Click the “Test Hardware” tab.

e. Click the <TCP/IP Test> button.

The Test Hardware Tab

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 99 100

Žádné komentáře

Measurement-computing IOtech 640 Series Uživatelský manuál Strana 91