Measurement-computing DaqScan 2000 Series Uživatelský manuál stáhnout pdf (Strana 37)

DaqLab/2000 Series & DaqScan/2000 Series 947091 Configuring the System for Operation 6-3

Dedicated Network - making use of a network hub or switch

In the following figure a DaqLab/2000 Series device is connected to the Ethernet through a

network hub/switch. At least one computer is also connected to the hub. DaqScan/2000

series devices can be connected directly to the hub/switch in the same manner.

Dedicated Network using a Hub/Switch

Some network devices such as a wireless access point may act as a DHCP

server. If this is the case, follow the instructions for the LAN with a DHCP

server. For detailed information consult the documentation that is specific

to your network device.

LAN with a DHCP Server

(Local Area Network with a Dynamic Host Configuration Protocol server)

Many corporations use the LAN/Server with DHCP arrangement for their networks. In

this type of setup several computers are typically connected to a network that makes use

of a DHCP server. In addition, the primary data acquisition device, e.g., DaqLab/2001, is

connected to the network hub/switch.

LAN with a DHCP Server

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 73 74

Žádné komentáře

Measurement-computing DaqScan 2000 Series Uživatelský manuál Strana 37