Measurement-computing CIO-PDISO8 Uživatelský manuál Strana 12

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 19
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 11
CIO-PDISO8 User's Guide Installing the CIO-PDISO8
11
Connecting the board for I/O operations
Connectors, cables main I/O connector
The table below lists the board connectors, applicable cables and compatible accessory boards.
Board connectors, cables, accessory equipment
I/O connector type
37-pin D connector
Compatible cables
C37FF-x, where x = length in feet
C37FFS-x, where x =5 or 10 feet
Compatible accessory products
(with the C37FFS-x and C37FF-x cables)
CIO-MINI37
SCB-37
Information on signal connections
General information regarding signal connection and configuration is available in the Guide to Signal
Connections. This document is available on our web site at www.mccdaq.com/signals/signals.pdf.
Pin out main I/O connector
Figure 5. Main I/O connector pin out
Caution! High voltages are present on the CIO-PDISO8 when you have connected high voltage inputs or
outputs to the CIO-PDISO8 connector. Use extreme caution! Never handle the CIO-PDISO8 when
signals are connected to the board through the connector.
Never remove the protective plates from the CIO-PDISO8.
Zobrazit stránku 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19

Komentáře k této Příručce

Žádné komentáře