Measurement-computing DBK84 Uživatelský manuál stáhnout pdf (Strana 4)

Module Configuration

Up to sixteen DBK84 modules can be attached to a single LogBook or Daq device. Since multiple

modules are connected via a parallel interface, each must have a unique channel address.

CAUTION

Adjustment of the channel address must only be performed when the system

power is OFF. Failure to do so may result in equipment damage.

To assign a channel address to the DBK84 module, first locate the DIP switch on the front panel (next to

P1). Four micro-switches [on the DIP switch] are used to set the module’s channel address in binary.

After ensuring that the system power is OFF, adjust the micro-switches to set the desired address.

Each module in the system must have a unique address.

DBK84 Channel Address Settings

pg. 4, DBK84 989494 DBK Option Cards and Modules

1 2 3 4 5 6 7 8

Žádné komentáře

Measurement-computing DBK84 Uživatelský manuál Strana 4